Licensed & Insured, in Santa Rosa and surrounding areas. Metal Roof Installation · Standing Seam Metal Roofing · Metal Roof Replacement.
Your Free Quote Request
All your work handled by qualified professionals in Santa Rosa
Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.
Included in your service
Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.
Included in your service
Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.
Included in your service
Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.
Included in your service
Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.
Included in your service
Priority leak response: we trace the leak to its real source instead of caulking the symptom.
Included in your service
The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.
Included in your service
Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.
Included in your service
The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.
Included in your service
Steel strength under a textured stone finish, with strong hail and wind performance.
Included in your service
Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.
Included in your service
Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.
Included in your service
Flashing is the number one leak point on any metal roof, and it is what we fabricate best.
Included in your service
Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.
Included in your service
Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.
Included in your service
A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.
Included in your service
Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.
Included in your service
Barns, workshops, churches, and light commercial metal roofing across the county.
Included in your service
Reach us by phone at (707) 285-9164 or fill out the estimate form. We get back to you within 24 hours, no commitment required.
Our Metal Roofing Contractor visits your property, evaluates the project, and provides a written quote before any work begins.
Our crew completes the metal roofing and leaves your property clean and tidy. Full cleanup is included.
Continuous training, professional equipment, meticulous and code-compliant work
Full coverage on all our job sites, no exceptions
Emergencies, weekends, holidays: available when you need us
Response within 24h, no commitment, by phone or form
Available Mon-Sun 7am-7pm
We serve in Santa Rosa and surrounding areas · On-site visits included · Free estimate within 24h
Santa Rosa Metal Roofing is a team of local certified professionals based in Santa Rosa. We respond quickly in Santa Rosa and surrounding areas with professional equipment suited to every job.
Free estimate, transparent pricing, no subcontracting. Tell us about your roof. We'll handle the rest.
📞 Call (707) 285-9164⭐⭐⭐⭐⭐ 4.9/5 · 177 verified Google reviews
“Had them out to fix a leak over our kitchen that three other guys couldn't figure out. Turns out it was the flashing around the chimney, and they had it sealed up in an afternoon. Two weeks of rain since and not a drop inside.”
Metal Roof Repair
“We were dreading a full tear-off on our 1960s ranch, but they did the retrofit right over the old shingles and saved us a ton. Crew of four knocked it out in three days and you'd never know they were here, not a single nail in the yard.”
Metal Roof Over Shingles (Retrofit)
“Our hay barn roof was rusted through in spots and I figured we'd have to replace the whole thing. They re-fastened the panels, swapped out every screw with new washers, and coated the bad sections instead. Half the cost of what I expected and the barn's dry again.”
Commercial & Agricultural Metal Roofing
“We had them put a standing seam roof on the new house we built off Mark West Springs. The seams are dead straight and the charcoal finish looks sharp. They worked around our builder's schedule without any drama, which honestly surprised me.”
Standing Seam Metal Roofing
“They came out to deal with the vent pipe and chimney flashing that was letting water in during storms. Good honest crew and the price was fair. Only gripe is they were a day later than scheduled, but they called ahead and the repair itself has held up perfectly.”
Metal Roof Repair
“Finally replaced the old failing metal roof on our place after years of patching it. They tore off the old panels, replaced some rotten decking area under the valley, and had the new roof on in under a week. The house is so much quieter when it rains now.”
Metal Roof Replacement
“Had them install a ribbed panel roof on our house and I couldn't be happier with how it came out. The crew was friendly, cleaned up every scrap of metal each day, and even hauled off the old stuff. Neighbors have already asked me who did it.”
Corrugated & Ribbed Panel Roofing
“Our metal roof was about 25 years old and starting to show its age, so we had them do a full replacement. The new copper-colored panels look amazing from the street. Took a little longer than quoted because of some hidden damage underneath, but they kept us in the loop the whole time.”
Metal Roof ReplacementReal photos of our work in Santa Rosa · Each image shows the final result achieved for our clients
Indicative estimates: your free personalized quote is always exact
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Exposed-fastener panel installation | Starting at $8/sq ft | Includes tear-off, underlayment, panels, and basic flashing; roof pitch and deck condition move the price. |
| Standing seam installation | Starting at $14/sq ft | Concealed clips, custom-fabricated panels, and full flashing; complexity and panel width drive the range. |
| Stone-coated steel installation | Starting at $12/sq ft | Granulated steel panels over prepared deck; HOA or historic profile requirements can add cost. |
| Copper and specialty metal installation | On estimate | Material cost and soldering detail vary widely; needs an on-site look before a number is given. |
| Travel | Included | In Santa Rosa and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (707) 285-9164, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Standing seam install, simple gable | Starting at $10/sq ft | Includes tear-off, underlayment, panels, and standard flashing; price rises with roof pitch and complexity. |
| Standing seam install, cut-up roof | Starting at $14/sq ft | Covers multiple valleys, skylights, and chimney flashing; steep hillside access adds labor and staging time. |
| Snap-lock standing seam | Starting at $9/sq ft | Concealed fastener without mechanical seaming; best for simpler gable roofs and outbuildings. |
| Complex or historic home | On estimate | Design review, color restrictions, and custom trim require an on-site look before we quote. |
| Travel | Included | In Santa Rosa and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (707) 285-9164, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Exposed fastener replacement | Starting at $9/sq ft | Includes tear-off, deck inspection, underlayment, and ribbed panel install on standard pitch |
| Standing seam replacement | Starting at $14/sq ft | Concealed fasteners and raised seams; price rises with pitch, valleys, and panel length |
| Stone-coated or metal shingle | Starting at $13/sq ft | Includes profile panels and trim; complex hips and historic district review add cost |
| Multi-layer tear-off | Add $2 to $4/sq ft | Each extra shingle layer adds labor and dump fees beyond the first layer |
| Decking repair | On estimate | Priced per sheet after tear-off reveals rot, soft spots, or failed original sheathing |
| Estimate | Free | On-site inspection and written scope within 24 hours at (707) 285-9164 |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Retrofit over single-layer shingles | Starting at $7/sq ft | Includes slip sheet, panel install, and standard flashing over a sound single-layer roof. |
| Retrofit with deck repair | Starting at $9/sq ft | Adds replacement of soft or rotted deck panels found during the pre-install inspection. |
| Standing seam recover | Starting at $11/sq ft | Concealed-fastener panels carry a premium over exposed-fastener corrugated on the same roof. |
| Complex or large-scale job | On estimate | Multi-story access, steep pitch, and heavy flashing work need an on-site look before we quote. |
| Travel | Included | in Santa Rosa and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (707) 285-9164, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Single fastener line or flashing repair | Starting at $450 | Covers one localized repair, new sealing washers, sealant, and a water test on the area. |
| Multi-panel or seam repair | Starting at $850 | Includes panel removal and reset, clip or seam work, and price rises with panel count and pitch. |
| Storm or limb damage repair | On estimate | Dented or punctured panels need an on-site look to match profile, color, and access. |
| Insurance documentation package | Included | Photo record and written scope for your claim file, with no promise of coverage. |
| Travel | Included | in Santa Rosa and surrounding Sonoma County areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (707) 285-9164, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Single leak point repair | Starting at $450 | Includes inspection, source tracing, and repair of one failed fastener or small flashing gap. |
| Multiple leak points or seam repair | Starting at $850 | Covers several failed fasteners, reseated seams, and water testing; roof pitch and height move the price. |
| Flashing rebuild at chimney or skylight | Starting at $1,200 | Includes cutting out failed flashing and rebuilding metal-to-metal laps; access and curb condition affect cost. |
| Panel section replacement | On estimate | Needs an on-site look to match profile and color and tie the new section into the existing roof. |
| Emergency tarping | Starting at $350 | Secures the roof during active storms; credited toward the permanent repair when booked together. |
| Estimate | Free | Response within 24 hours at (707) 285-9164, no obligation to book the repair. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Single-slope re-fastening | Starting at $750 | Inspection, replacement screws and washers, and re-torque on one manageable roof slope. |
| Full roof re-fastening | Starting at $1,450 | Every failed fastener across the roof replaced; price rises with square footage and roof pitch. |
| Oversized fastener repair | Starting at $950 | Enlarged holes drilled and fitted with oversized screws; cost moves with how many purlins are compromised. |
| Complex or large-scale job | On estimate | Tall barns, steep slopes, and roofs with widespread failure need an on-site look before pricing. |
| Travel | Included | in Santa Rosa and surrounding Sonoma County areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (707) 285-9164, no obligation to book the work. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Corrugated panel install (standard shed or barn) | Starting at $5.50/sq ft | Includes standard gauge panels, fasteners, closures, and basic tear-off and hauling. |
| R-panel (ribbed) install | Starting at $6.50/sq ft | Stiffer ribbed panel with proper screw pattern, closures, and underlayment included. |
| Re-fastening and closure reset | Starting at $3.50/sq ft | Replaces backed-out screws, washers, and dried closures without pulling good panels. |
| Complex or large-scale building | On estimate | Tall winery buildings, complex flashings, and limited access need an on-site look first. |
| Travel | Included | In Santa Rosa and surrounding areas, with no separate call-out or mileage fee. |
| Estimate | Free | Response within 24 hours at (707) 285-9164, with no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Shake-profile steel shingles | Starting at $9/sq ft | Includes tear-off, underlayment, panels, and standard trim on a typical single-story roof. |
| Slate-profile steel shingles | Starting at $10.50/sq ft | Covers panel install plus hip and ridge trim on steeper historic-home pitches. |
| Stone-coated steel shingles | Starting at $11/sq ft | Granule-coated panels with heavier texture and a longer manufacturer finish warranty. |
| Deck repair and replacement | From $4/sq ft | Priced per square foot of rotten sheathing found once the old roof is stripped off. |
| Complex or large-scale job | On estimate | Steep pitches, multiple dormers, chimneys, and historic review need an on-site walk first. |
| Estimate | Free | Response within 24 hours at (707) 285-9164, no obligation to book the job. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Stone-coated steel, standard profile | Starting at $9/sq ft | Installed field panels on an accessible single-story roof, excluding tear-off and deck repair. |
| Shake or tile profile upgrade | Starting at $11/sq ft | Textured shake or tile look with premium finish, priced higher per square for the profile. |
| Tear-off and deck repair | Starting at $2.50/sq ft | Old roof removal, sheathing inspection, and replacement of any rotted decking found. |
| Steep or complex roof | On estimate | Two-story hillside access, multiple valleys, or a steep Victorian pitch needs an on-site look. |
| Travel | Included | In Santa Rosa and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (707) 285-9164, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Copper accent roof (porch, bay or dormer) | Starting at $20/sq ft | Includes hand-formed pans, soldered seams and matching flashing; complexity of the shape moves the price up. |
| Full copper roof (architectural) | Starting at $32/sq ft | Includes standing seam or flat-lock copper over new underlayment; roof height and access drive the final number. |
| Zinc or aluminum accent roof | Starting at $16/sq ft | Includes formed pans and flashing for bays and porches; metal choice and profile complexity affect the rate. |
| Copper flashing and trim package | Starting at $1,200 | Includes chimney, skylight and wall flashing plus fascia caps; number of penetrations and access set the price. |
| Historic profile fabrication | On estimate | Custom profiles and ornament require an on-site look and shop time before a number is given. |
| Estimate | Free | Response within 24 hours at (707) 285-9164, with no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Acrylic coating system | Starting at $2.50/sq ft | Includes pressure wash, primer, and two topcoats on clean, rust-free panels with standard access. |
| Urethane coating system | Starting at $3.75/sq ft | Harder UV-resistant film for high-sun roofs, priced higher due to solvent product and extra prep. |
| Rust treatment and fastener replacement | Add $0.75 to $1.50/sq ft | Covers rust converter, spot priming, and new screws with EPDM washers before coating goes down. |
| Barn, winery, or large agricultural building | On estimate | Large square footage, steep pitches, and eave-line rust need an on-site look before pricing. |
| Travel | Included | In Santa Rosa and surrounding Sonoma County areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (707) 285-9164, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Chimney counterflashing replacement | Starting at $600 | Covers removing old flashing and bending new metal for one chimney on an accessible roof |
| Skylight flashing and curb reseal | Starting at $750 | Includes new curb flashing and sealant, priced higher for steep or high roofs |
| Valley or step flashing repair | Starting at $900 | Opens the transition, replaces rusted metal; complex roof intersections push the price up |
| Multiple penetrations or rotted decking | On estimate | We need to see the extent of deck damage and panel work before quoting a number |
| Travel | Included | in Santa Rosa and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24 hours at (707) 285-9164, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Single release zone guard install | Starting at $1,200 | Low-profile guards on one release zone over an entry, hardware and sealant included. |
| Multi-zone guard layout | Starting at $1,850 | Two or three release zones on a steep roof, layout and sealing included in the scope. |
| Snow rails on barn or winery building | On estimate | Long panel runs and agricultural access require an on-site look before we quote a number. |
| No-guard assessment and written finding | Free with inspection | Roof-side check of pitch, panel profile, and hazard below, with a written recommendation. |
| Travel | Included | In Santa Rosa and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (707) 285-9164, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Storm damage inspection | Free | Full roof walk, photo documentation, and written repair-versus-replace recommendation, no obligation |
| Minor wind repair | Starting at $450 | Re-seat lifted panels, replace pulled screws and washers, re-seal seams on isolated damage |
| Panel and flashing repair | Starting at $1,200 | Replace punctured panels and rebuild ridge cap or flashing, price moves with panel count and access |
| Partial re-roof section | On estimate | One slope or section replaced when damage covers more than isolated panels, needs on-site scope |
| Travel | Included | in Santa Rosa and surrounding Sonoma County areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24 hours at (707) 285-9164, no obligation to book the work |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Residential walk-over inspection | Free estimate | Full roof walk with photo documentation, quoted flat by roof size and pitch. |
| Pre-sale or buyer inspection | Starting at $250 | Written condition report with remaining service life, priced by roof complexity and access. |
| Insurance documentation inspection | Starting at $300 | Detailed photo record and written findings, cost rises with report depth and urgency. |
| Post-storm damage inspection | On estimate | Needs an on-site look to scope wind uplift, panel damage, and water intrusion findings. |
| Travel | Included | In Santa Rosa and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (707) 285-9164, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Seamless gutter, standard 5-inch run | Starting at $9/linear ft | Includes on-site roll forming, hangers, and basic downspout; access and story height move the price. |
| Oversized 6-inch with 3x4 downspouts | Starting at $14/linear ft | Built for storm volume on large roof planes; valley count and downspout runs raise the figure. |
| Ember-resistant metal gutter guards | Starting at $6/linear ft | Stainless or aluminum mesh for fire country; roof pitch and guard profile affect the rate. |
| Historic or complex profile (half-round, custom) | On estimate | Design review, custom color, and period profiles require an on-site look before pricing. |
| Travel | Included | In Santa Rosa and surrounding Sonoma County areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24 hours at (707) 285-9164, no obligation to book the work. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Commercial or agricultural roof inspection | Free estimate | On-site assessment of panels, fasteners, flashing, and deck condition, with a written scope and recommendation. |
| Exposed-fastener panel repair or re-fastening | Starting at $1,200 | Includes screw replacement, washer renewal, and closure work; price moves with roof size and access difficulty. |
| Full metal roof replacement | On estimate | Priced per square after tear-off, deck repair, panel system, insulation, and flashing scope are confirmed on site. |
| Insulated panel system for conditioned space | On estimate | Requires on-site review of span, condensation control needs, and building use before a number is given. |
| Travel | Included | In Santa Rosa and surrounding Sonoma County areas, with no separate call-out or mileage fee. |
| Estimate | Free | Response within 24 hours at (707) 285-9164, with no obligation to book. |
Indicative rates, actual cost varies with project size, materials, and site access. Free personalized estimate within 24h.
Homeowners searching for a metal roofing contractor near me in Santa Rosa want a crew that understands this terrain, not a call center three states away. Santa Rosa Metal Roofing connects you with a network of licensed, bonded, and insured local contractors who install, replace, re-roof, and repair metal roofs on the steep pitches, under heavy oak and redwood cover, and across the high-exposure hillsides that define Sonoma County. From the Victorian and Craftsman homes near Railroad Square to the ranch houses of Bennett Valley and the fire-rebuild neighborhoods of Coffey Park and Fountaingrove, we match the system to the structure.
We serve Santa Rosa, Petaluma, Rohnert Park, Windsor, Napa, and the surrounding communities, including hillside homes and vineyard and agricultural buildings where Class A metal assemblies are increasingly the standard. That includes a large stock of 15 to 30 year old screw-down roofs now due for fastener service. If you are weighing repair against replacement, start with a free estimate and straight answers about what your roof actually needs.
Most metal roof leaks we see in Santa Rosa trace back to a handful of predictable failures. The leading cause on 15 to 30 year old exposed-fastener roofs is fasteners backing out as their EPDM sealing washers dry, shrink, and crack, letting water past the screw head. Thermal movement works seams and closures loose over years of hot summers and cool nights. Pipe boots, chimney and skylight flashing, and valley transitions fail as sealant ages. Wind events lift and peel panel edges, and fallen limbs puncture panels. None of these are mysterious, and all of them get worse when ignored.
Water rarely stays where it enters. It tracks along purlins and decking, sometimes surfacing feet from the actual breach, which is why a small leak can rot sheathing and saturate insulation before a stain appears on your ceiling. Our metal roof leak repair starts with finding the true entry point, not just sealing the symptom. In many cases a full screw replacement with new fasteners and washers restores a watertight roof for a fraction of replacement cost, and we will tell you plainly when that is the right call and when it is not.
If you have an active leak, lifted panels after a storm, or a puncture from a fallen limb, call (707) 285-9164 to schedule an inspection. We document what we find, explain your repair options, and never push a replacement you do not need. For non-emergency questions, you can also contact us to set up a visit.
We install the full range of residential and light commercial metal systems. Standing Seam Metal Roofing uses concealed clips and raised seams for a clean profile and no exposed fasteners to service. Corrugated & Ribbed Panel Roofing is the economical workhorse for cabins, barns, and workshops. We also install Metal Shingle Roofing, Stone-Coated Steel Roofing, and Copper & Specialty Metal Roofing for accents and historic profiles.
The honest comparison: standing seam costs more up front but has no exposed screws to maintain, while screw-down costs less and needs its fasteners serviced over the roof's life. We also assess Metal Roof Over Shingles (Retrofit) when the deck is sound, and recommend a full tear-off when it is not. Matching the system to your home, pitch, and budget matters more than selling the most expensive panel.
Metal roof projects are typically quoted per square foot, while many repairs are priced flat-rate. Your price depends on the panel system and metal gauge, roof pitch and complexity, tear-off versus recover, decking condition, and access. We present typical ranges so you can plan, and we always note that final pricing depends on the roof and site conditions. Some carriers may offer premium discounts for metal or impact-rated roofs, though that is between you and your insurer.
For a clearer picture of how systems and scopes compare, see our pricing page, then request a free estimate or free roof inspection so we can give you numbers tied to your actual roof rather than a generic figure.
After a storm, we inspect the roof and provide written documentation with photos that you may submit to your own insurer. We are not an insurance adjuster or agent, coverage decisions rest with your carrier, and we make no promise that a claim will be approved. What we can do is give you clear, organized evidence of what we found and what repair or replacement involves.
On permits: in most jurisdictions a permit is commonly required for a full replacement or re-roof, but requirements vary by city, and thresholds, fees, and inspection requirements differ. Historic district or HOA design review can also restrict panel profile and color choices. Requirements vary, so always verify with the Santa Rosa building or planning department before starting your project. To schedule an inspection or ask a question, contact us.
Ready to get started? Santa Rosa Metal Roofing serves in Santa Rosa and surrounding areas. Get your free, no-obligation estimate today.
Get a Free EstimateMetal Roofing in Santa Rosa · Response within 24h · No commitment · ☎ (707) 285-9164
Your Free Quote Request